|BIFMA Standards Overview|
Furniture Comfort, Safety, Sustainability, and Durability Standards
BIFMA Product Safety and Performance Standards and
ANSI/BIFMA X5.1 Office Seating
ANSI/BIFMA X5.3 Vertical Files
ANSI/BIFMA X5.4 Lounge and Public Seating
ANSI/BIFMA X5.5 Desk Products
ANSI/BIFMA X5.6 Panel Systems
ANSI/BIFMA X5.9 Storage
ANSI/BIFMA X5.11 Large Occupant Office Seating
ANSI/BIFMA X6.1 Educational Seating
ANSI/SOHO S6.5 Small Office/Home Office
ANSI/BIFMA M7.1 Standard Test Method for Determining VOC Emissions
ANSI/BIFMA X7.1 Standard for Formaldehyde and TVOC Emissions ANSI/BIFMA e3 Furniture Sustainability Standard
BIFMA HCF 8.1 - Healthcare Furniture Design - Guidelines for Cleanability BIFMA G1 Ergonomics Guideline for Furniture
BIFMA Color - 2005 Color Measurement
BIFMA PCR for Seating: UNCPC 3811
BIFMA PCR for Storage: UNCPC 3812
BIFMA PD-1-2011 Mechanical Test Standards-Compiled Definitions
BIFMA Quality v9.3 (24May04)
BIFMA Sustainability Guidelines for Office Furniture - 2005
BIFMA Tex4.1 - 2005 Woven Textile Characteristics
The BIFMA Engineering Committee organizes the development of our standards, shepherding the process from the formation of working groups and canvass lists, through the drafting and revision of standards, to the publication and regular review of accepted standards. The standards are intended to provide manufacturers, specifiers, and users with a common basis for evaluating safety, durability, and the structural adequacy of the specified furniture, independent of construction materials. The standards define specific tests, laboratory equipment and test conditions, and minimum acceptance levels to be used in evaluating products.
United States Furniture Compliance RequirementsThe U.S. Department of Commerce and the National Institute of Standards and Technology have put together "A Guide to United States Furniture Compliance Requirements." This Guide includes a broad range of mandatory and voluntary requirements for selling furniture in the United States. (Note - BIFMA references listed on pages 20-22 and 25).
International Furniture Standards
BIFMA is also accredited by ANSI to be the administrator of the U.S. Technical Advisory Group to ISO Technical Committee TC-136 Furniture. This has been very useful for BIFMA in its involvement with International Standards for office furniture. However, ISO TC-136 covers ALL furniture, not just office furniture. Those interested in International Standards for furniture other than office furniture should contact BIFMA.
The specific procedures that BIFMA follows in developing standards are outlined here. BIFMA’s Scope of Accreditation is detailed in Scope of Accreditation.
Healthcare Furniture Cleaning Guideline
An overview of the BIFMA Healthcare Furniture Cleaning Guide hosted by the University of Michigan, January 2015.
Chair Measurement Device
BIFMA members are evaluating a new Chair Measurement Device (CMD) that is now recognized by the International Standards Organization (ISO). Measurements with the new ISO CMD are per ISO Technical Report 24496:2012 Office furniture - Office work chairs - Methods for the determination of dimensions. A round robin study of this device and method has been completed at Advanced Furniture Testing in Holland, Michigan. If you are interested in information from this study, please contact Dave Panning at BIFMA.
Independent consultant Tom Rademaker hosted eight training videos on how to use the ISO CMD per ISO TR 24496:2012 which you may view below.
Placing the CMD in the Chair
Angle Measurement: Part I
Angle Measurement: Part II
Dimensions with CMD in the Chair
Dimensions with CMD Removed from the Chair